TIE Titan TS3X Manuel D'utilisation page 4

BiNAURAL ModE
Place the headset into the charging case
1.
Place the headset into the charging case.
the red status light will turn on, which
means that it is charging. When charging
is finished, the blue status light will light up
for five seconds. The headset takes about
45 minutes to charging.
(If the charging case battery is low, please
charge the case first)
Take out the headset
2.
If the headset is still inside the main body
of the charging case, please remove it
first. (The headset is designed to be easy
to remove from the charging case. Push
the headset upwards from the bottom and
the headset will be pop out. If the head-
set is pushed downwards, it will return to
the charging case). Once the "L" and "R"
earphones have been taken out, they will
turn on automatically. After around ten
seconds, they will connect automatically,
after which the status light on the "L" earphone will alter-
nately flash red and blue (as the primary earphone) while
the light on the "R" earphone will turn off (Secondary one).
"L" earphone flashes red and blue "R" earphone light off
3