Installation Instructions - Eneo IPD-52M2712M5A Guide D'installation Rapide

Installation instructions

CAUTION: The camera's base should be attached to a structural
object, such as concrete, hard wood, wall stud or ceiling rafter
that supports the weight of the camera. If necessary use appro-
priate mounting material (e.g. anchors) instead of the material
enclosed with the camera.
1. Drill four holes for mounting on the ceiling or wall.
2. Place the dome base at the pre-drilled installation position and fix it by using
mounting screws.
3. Route the power & ethernet cable to the connecting place.
4. Adjust the camera's viewing angle (Pan, Tilt, Rotation)
5. Hanging a Dome Cover.
6. Assemble the dome cover to the dome base unit.
Optional mounting accessories
For information on optional mounting accessories please visit the eneo website at www.
eneo-security.com.
(Insert the safety wire ring on a hook.
-> Fold the hook not to slip off.)
Plastic Anchor
Mounting Screw
EN
7