Publicité
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our CHAUVET Professional line of mounting
clamps, go to http://trusst.com/products. The rack mount ears are not shipped connected to the product.
Mounting Diagram
Rubber Feet for
Surface Mounting
Removable
Rack Ears
Mounting Guidelines
Chauvet recommends using the following guidelines when mounting this product:
•
Before deciding on a location, always make sure there is easy access to the product for maintenance and
programming.
•
Make sure that the structure or surface onto which you are mounting the product can support the product's weight
(see the User Manual).
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point,
such as an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When mounting the product on the floor, make sure that the product and cables are away from people and
vehicles.
Control Panel Description
Button
Function
<LEFT> Exits from the current menu or function or navigates downwards through the Main Level list
<RIGHT> Enables the currently displayed menu or sets the currently selected value into the selected function
<UP>
Navigates upwards through the menu list or increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
ÉPIX Drive 2000 IP QRG Rev. 8
QUICK REFERENCE GUIDE
Safety
Notes. Use at least one mounting point per product. Make sure the
(x4)
Mounting
Clamp
Omega
Bracket
EN
Safety Cable
Safety Loop
4
Publicité
