LF Kobalt TQ3126 Manuel page 11

inStallation inStruCtionS
2. Familiarize yourself with the pressure switch once cover is removed.
2
Tank Pressure
Gauge
3. Remove ground screw. Install strain relief on pressure switch. Do not tighten strain relief on
power cord until wiring is complete. Insert the bare wires (black, white, bare/green) through the
strain relief.
Attach bare/green ground wire first to ground screw on pressure switch body.
Look for the "Line" markings on pressure switch. Install Line wires and tighten terminal screws.
3
ASME Safety
Valve
Terminal Screw
Motor Terminal
Ground
Line
Screw
Terminal
White Line Wire
Black Line
Wire
Power Cord
Strain Relief
11
Motor Power
Cord
Motor Cord Strain
Relief
Bare/green
Ground Wire