Reminders For The Maintenance Technician; Reminders For Cleaning; Safety And Control Devices; Electric Griddle Plate - KBS DI7FTE8 Serie Mode D'emploi

• Do not allow the appliance to operate emp-
ty for prolonged periods. Only pre-heat the
oven just before use.
• Do not leave the appliance unattended
while in operation.
• In the event of an appliance fault or mal-
function, shut the gas shut-off valve and/or
switch the appliance off at the main switch
installed upline.
• Clean the appliance following the instruc-
tions given in Chapter " INSTRUCTIONS
FOR CLEANING".
• Do not store flammable materials in close
proximity to the appliance. FIRE HAZARD.
• Do not obstruct any air vents or drains pre-
sent on the appliance.
• Do not tamper with appliance components.
• Close doors and drawers after use.
REMINDERS FOR THE MAINTENANCE
TECHNICIAN
• Read this manual carefully. It provides im-
portant information for safe installation,
use and maintenance of the appliance.
• Installation, conversion to a different type
of gas and appliance maintenance must
be carried out by qualified technicians au-
thorized by the manufacturer, in complian-
ce with current safety standards and the
instructions given in this manual.
• Identify the specific appliance model. The
model number is detailed on the packa-
ging and on the appliance data plate.
• The appliance must be installed in a well-
ventilated room.
• Do not obstruct any air vents or drains pre-
sent on the appliance.
• Do not tamper with appliance components.

REMINDERS FOR CLEANING

• Clean the satin finish stainless steel exte-
rior surfaces, the cooking wells and the
surface of the hotplates every day.
• At least twice a year, have an authorized
technician clean the internal parts of the
appliance.
• Do not use direct or high pressure water
jets or steam cleaners to clean the ap-
pliance.
• Do not use corrosive products to clean the
floor or shelf beneath the appliance.
• Do not wash the body or flame spreader of
the hob burners in the dishwasher.

3 SAFETY AND CONTROL DEVICES

ELECTRIC GRIDDLE PLATE

SAFETY THERMOSTAT
The manufacturer will not be liable for
any damage or injury resulting from fai-
lure to observe the following rules.
• The appliance is equipped with a manual
reset safety thermostat which interrupts
heating when the operating temperature
exceeds the maximum permitted value.
• To restore appliance operation, press the
thermostat reset button. This procedure
must only be carried out by a qualified, au-
thorized technician.
4 DISPOSAL OF PACKAGING AND THE
APPLIANCE
PACKAGING
The packaging is made using environmen-
tally friendly materials. The plastic recycla-
ble components are:
• the transparent cover, the bags contai-
ning the instructions manual and nozzles
( made of polyethylene - PE.).
• the straps (in polypropylene - PP).
APPLIANCE
The appliance is manufactured 90% from
recyclable metals (stainless steel, alumi-
num sheet, copper.... ).
The appliance must be scrapped in com-
pliance with current regulations governing
such disposal.
• It must be disposed of properly.
• Make the appliance unusable before
scrapping.
5