Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
, Hairsprays contain flammable material – do not use while using this
product.
3
Section the hair prior to styling. Style the lower layers first.
4
Plug the product into the mains power supply. Press the on button inside
the straightener to switch it on.
5
When the styler is plugged in but not turned on, '---' will show in the display
window indicating the styler is in standby mode.
6
Start styling on lower temperatures first. Select appropriate temperature for
your hair type using the silver rotating temperature dial found at the back of
the straightener.
7
To adjust the temperature use the rotating temperature dial. To increase the
temperature turn the dial clockwise following the increasing temperature
graphic and to decrease the temperature turn the dial anti-clockwise
following the decreasing temperature graphic. As you turn the dial the
temperature will be displayed in the digital display.
, Recommended temperatures:-
Low
Medium
High
, Caution: The hottest temperatures should only be used by experienced
stylers.
8
The digital display will stop flashing when the product is ready to use.
9
Working on one section at a time, run the straightener through the entire
length of the hair without stopping.
10 Only repeat twice per section to prevent damage to the hair.
11
After use, press and hold the off button to turn off then unplug the
appliance.
12
Let the appliance cool before cleaning and storing away.
, Hinge Lock for Storage
•
The plates can be shut together for easy storage:
•
To lock, push the hinge lock up to the locked position.
•
To unlock, pull the hinge lock down to the unlocked position.
, NOTE: Do not heat the unit in the locked position.
4
Temperature
150°C / 170°C
190°C / 210°C
230°C
Hair Type
Thin/Fine, damaged or
bleached hair
Normal, healthy hair
Thick, very curly and
difficult to style hair
Publicité
