Klarstein ICEFESTIVAL CUBE Mode D'emploi page 18

EN
18
Operating Instructions
Step 1
Add water by manual: Open the lid, take out of the ice basket and fill the water
reservoir with water.
Note: Make sure the water is not over the bottom of the ice collecting tray.
Add water by auto filling: please connect the pipe at back of the unit to the water tap
directly.
Press it to start or stop the ice making.
It lights up if the machine is under ice shaving
process.
It lights up when the water in water tank is not
enough
It lights up when ice is on making
It lights up when the ice basket is full
It lights up when the unit is on auto cleaning
process.