Gima OXY-5 Instructions De Fonctionnement Et Entretien page 100

Guidance and manufacturer's declaration – electromagnetic immunity
The Fingertip Oximeter is intended for use in the electromagnetic environ-
ment specified below. The customer or the user of The Fingertip Oximeter
should assure that it is used in such an electromagnetic environment.
Immunity IEC60601
test test level
Conducted 3 Vrms
RF IEC 150 kHz
61000-4-6 to 80 MHz
Radiated
RF IEC 3 V/m
61000-4-3 80 MHz to
2.5 GHz
Compliance
level
N/A
3 V/m
Electromagnetic environment -
guidance
Portable and mobile RF com-
munications equipment should
be used no closer to any part of
The Fingertip Oximeter, including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance
d= 1.2 √P
d= 1.2 √P
80MHz to 800MHz
d= 2.3 √P
800MHz to 2.5GHz
Where P is the maximum output
power rating of the transmitter in
watts (W) according to the trans-
mitter manufacturer and d is the
recommended
tance in metres (m).
Field strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey,
should be less than the com-
pliance level in each frequency
range.
b
Interference may occur in the vi-
cinity of equipment marked
with the following
symbol.
100
separation dis-
b
a