Beko FN 126400 Mode D'emploi page 17

4. Temperature Setting Indicator
Setting indicator on the right hand
side of the temperature value set by
Freezer Set Function turns on and the
other temperature setting indicators
remain off.
5. Temperature Indicators:
-24, -22, -20 and -18 indicators light
up continuously.
6. Eco-Fuzzy (Special Economic
Usage) Function:
Press Eco-Fuzzy button to activate the
Eco Fuzzy Function. Cooler/freezer will
start operating in the most economic
mode at least 6 hours later and the
economic usage indicator will turn on
when the function is active. Press Eco
Fuzzy button again to activate the Eco-
Fuzzy function.
7. Eco-Fuzzy (Special Economic
Usage) Indicator:
This icon lights up when the Eco-
Fuzzy Function is active.
8. High Temperature/Error Warning
Indicator:
This light comes on during high
temperature failures and error warnings.
9. Economic Usage Indicator:
Economic Usage Indicator turns on
when the Freezer Compartment is set
to -18°C.
10. Freezer Off Function:
Press Freezer Set button for 3
seconds to activate the Freezer Off
Function. Cooler/freezer stops cooling.
All indicators except the Freezer Off
on the display turn off. Buttons on the
display do not function. Press Freezer
Set button for 3 seconds to cancel this
function.
11-Energy Saving Function
When you press this button, Energy
saving icon will light up and Energy
Saving Function will be activated. If
energy saving function is active, all
icons on the display other than energy
saving icon will turn off. When the
Energy Saving Function is active, if any
button is pressed or the door is ope-
ned, Energy Saving Function will be exi-
ted and the icons on display will return
to normal.If you press this buton aga-
in, Energy Saving icon will turn off and
Energy Saving Function will not be ac-
tive.
12-Energy Saving Indicator
This icon lights up when the Energy
Saving Function is selected
13-Key Lock Mode
Press Quick Freeze and Freezer Set
buttons concurrently for 3 seconds.
Key Lock icon will light up and key lock
mode will be activated. Buttons will not
function if the Key Lock mode is acti-
ve. Press Quick Freeze and Freezer
Set buttons concurrently for 3 seconds
again. Key Lock icon will turn off and
the Key Lock mode will be exited.
17
EN