Publicité
12.4 Disposal of the packaging
The packaging protects the device against damages during transport. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
►
If possible, keep the original packaging of the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
12.5 Setup
12.5.1 Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfill the following prerequisites:
• The device must be set up on a firm, flat and horizontal surface with sufficient load-
bearing capacity for the scale and the maximum weight of the food that should be
weighed.
• Choose the setup location in such a way that children cannot reach the device.
• Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
12.6 Rating plate
The rating plate with the performance data can be founded on the back of the device.
13
Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages.
13.1 Power Supply
Open the battery cover and put in a battery (3V type CR2032).
13.2 Replacing the battery
+-symbol must face upwards.
Auto switch-off occurs if the display shows "LO" because of low battery.
During extended periods of non-using, always remove the battery.
Please note
When the display indicates low battery
which is located underneath the device and replace the battery with a
new one.
When inserting the battery, always observe the correct polarity. The
, open the battery cover
12
Publicité
