NVision Multi Chemistry 50W Mode D'emploi page 19

 Safety timer
This function adds an extra layer of security during the charge. The charge will be interrupted once
the set time is reached, whether the battery is fully charged or not.
Safety Timer
ON 120min
 Capacity cut-off
This is another safety feature that checks the amount of energy (in mAh) that is supplied to the battery
during charge. The charge will be interrupted once the preset value is reached, whether the battery
is fully charged or not.
Capacity Cut-Off
ON 5000mAh
 Audio signals
You can enable and disable the audio signals, which are emitted by the charger.
Key Beep ON/OFF
Buzzer ON/OFF
 Power supply control
This function will stop any charging procedure if the power supply voltage drops below a certain
threshold.
Input Power Low
Cut-Off 10.0V
 Charge settings memory
The charger is equipped with a memory that can store settings for ten different batteries.To modify
the memorized settings, use the STOP or - keys to select the save data screen and then press the
START key.
www.nvisionweb.net 19