Power Source; Battery Connection - NVision Multi Chemistry 50W Mode D'emploi

The charger can be powered directly from a 100-240VAC mains power outlet using the provided power
cord. You can also use an 11-18VDC power source using the provided adapter cable.
Warning! Only use one power input at a time, using both inputs at the same time will create a
short circuit!
Connect the battery leads to the battery, respecting the polarities, red is positive (+), black is negative
(-). To use balancing, connect the LiPo, LiFe or Li-Ion battery JST-XH balancing connector inside the
corresponding connector on the charger.
+
-
Output
Respect polarities + (red)
connector
10

Power source

100-240VAC Power Source

Battery connection

+
Balancing connector
and - (black)
OR
11-18VDC Power Source
Balancing connector
-
50W model
Default Direct connection of the white balancing connector of
the battery to the balancing connector of the charger
Optional NVO3502 4-in-1 Universal balancing board
nVision Multi Chemistry High-End Charger
80W model 4x50W model