Publicité
Les langues disponibles
Les langues disponibles
e n g l i s h
Configuration 5.1 without the Max
5 iO speakers + 1 Furio subwoofer or 2 main
speakers + 3 iO speakers + 1 Furio subwoofer
Connect each speaker output of the 5.1 amplifier directly to the
matching iO speaker (front right, front left, centre, etc.).
Connect the subwoofer CINCH RCA output of the amplifier to
one CINCH RCA LINE IN post of the subwoofer.
Then adjusts the set-up menu of your audio video amplifier:
For 5 iO speakers:
FRONT
CENTER
SURROUND
SUBWOOFER STEREO
SUBWOOFER / LFE
SUBWOOFER FREQUENCY
For 3 iO speakers and 2 large bandwidth front speakers:
FRONT
CENTER
SURROUND
SUBWOOFER STEREO
SUBWOOFER / LFE
SUBWOOFER FREQUENCY
TECHNICAL DATA
SPECIFICATIONS
Installation
Ways
Drivers
Crossover frequency
Frequency bandwith
Pulsed sound pressure
Efficiency
High-pass filter
Nominal impedance
Minimum impedance
Power handling
Peak power handling
Lowpass cut-off frequency
Phase switch
Input
Magnetic shielding
Max Cabasse module included
Voltage
Maximum power consumption
Diameter of the sphere
iO base version
dimensions (h x w x d)
weight
iO stand version dimensions (h x w x d)
weight
iO in ceiling
dimensions (h x w x d)
weight
Because of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the models
presented in specification sheets, advertising materials and manuals without prior notice.
Our web site www.cabasse.com will give you the specific adjustments we recommend for the use of our active subwoofers.
SMALL
SMALL
SMALL
YES
YES
180 Hz
LARGE
SMALL
SMALL
NO
YES
180 Hz
iO SPEAKER
2/7 channels
2
tweeter-midrange 2 ways coaxial
DOM25/13F15
DOM25/13F15 à 2 700 Hz
180 - 20 000 Hz
in semi-reverberating chamber
93 dB/2,8 v/1 m
180 Hz
8 ohms
3,2 ohms
80 W
560 W
0 ° normal, 180 ° reverse
yes
115/230 V, AC - 50/60 Hz
16 cm - 6.3 in
19 x 16 x 20 cm - 7.5 x 6.5 x 8 in
2 kg - 4.9 lb
105 x 30 x 30 cm - 41.5 x 12 x 12 in
10 kg - 21 lb
26 cm de diamètre
2 kg - 4.9 lb
FURIO SUBWOOFER ADJUSTMENTS
In any cases configuration 2.1 or configuration
5.1, the adjustment of frequencies CROSSOVER
FREQUENCY is positioned as follows:
The adjustment of the LEVEL will depend upon
room positioning, type of amplifier, etc. With the
Furio subwoofer, the average position of the LEVEL
control is as follows:
For an optimum adjustment of this level, we advise you to car-
ry it out starting from a stereo source (CD).
To adjust the level of the low frequency effect channel, do not
modify the sound level of the Furio subwoofer but go into the
set-up menu of your audio video amplifier 5.1 and adjust the
SUBWOOFER / LFE channel.
SUBWOOFER FURIO
caisson de graves actif
1
modèle 21M18LB4C - 21 cm
30 - 200 Hz
in semi-reverberating chamber
114 dB
actif
250 W
750 W
from 40 to 180 Hz
2 low level, 2 high level
-
yes
165 W
37 x 26 x 37 cm - 20 x 13 x 17 in
18 kg - 40 lb
Publicité
