WOLFF GM-200 Mode D'emploi page 8

Alarm
Exceeding the set value will trigger a sound alarm. For each scale an individual alarm threshold can be set. Alarm
thresholds are set in the operating menu. To change the setting for the material of choice, select the "Alarm Level" item
in the operating menu and press the "ON" button. After selecting the scale, press the "ON" button once again to set the
alarm threshold. After changing the alarm threshold, confirm the value by pressing the "ON" button.
To protect against accidental changes, it is necessary to confirm the action by pressing the „ON" button once again. To
cancel the change, press the "SELECT MATERIAL" button. Alarm thresholds are stored in the memory, even if the
batteries are removed. If the "Factory Settings" (Werkseinstellungen) option is selected, all the changes will be
replaced with the factory settings.
Language selection
The software has been designed to allow the user to choose between different languages.
The language is changed from the menu. To open the language selection menu, select the Language item in the
operating menu and confirm by pressing "ON". Select the language and confirm by pressing "ON". To protect against
accidental changes, it is necessary to confirm the action To confirm the change press the "ON" button once again,
press "SELECT MATERIAL" to cancel. Language settings are stored in the memory, even if the batteries are removed.
Restore factory settings
Factory reset will undo all the changes of the alarm thresholds. To restore the factory settings, select the "Factory
Settings" (Werkeinstellungen) item from the menu and confirm by pressing the "ON" button.
To protect against accidental changes, it is necessary to confirm the action To confirm the change press the "ON"
button once again, press "SELECT MATERIAL" to cancel.
Power supply
The GM-200 hydrometer is powered by two AA batteries. You may use either disposable or rechargeable batteries.
The Battery status indicates the battery charge level. If an empty battery icon is displayed, replace the batteries.
Batteries should be replaced with a new set of batteries of the same kind. Do not use a rechargeable battery in
combination with a disposable battery or a partially discharged battery with a full battery.
The figure below shows the location of the batteries in the battery compartment.
Warranty:
Notwithstanding the statutory warranty claims,WOLFF provides a warranty in accordance with the laws of the
Customer's country for a period of at least two years from the date of sale of the device to the end user.
The warranty covers only those faults which are caused by defects in material or workmanship.
A warranty claim must be accompanied by a proof of purchase with the date of sale specified.
Warranty repairs shall be performed only by an authorized distributor of WOLFF.
The following are excluded from the warranty:
The warranty also excludes devices that are partially or entirely disassembled.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10 | E-Mail info@wolff-tools.com |
Misuse.
•
Use of force, damage caused by external factors or foreign bodies such as sand or
•
water.
Damage caused by failure to comply with the instructions for use.
•
Normal wear and tear.
•
Internet www.wolff-tools.de