habitat et jardin Bineta Mode D'emploi page 15

Step 4:
A: Put the Pulse sensor wire (50) through
the handlebar post (2) and then out of
the hole of the computer bracket. Fix
the armrest (8) on the handlebar post (2)
with Hex screw (51) and Spring washer
(52) and then cover the Handlebar
chuck cover (53) to the related position.
B: Attach the Handlebar (7L/R) to the
Swing bar (6L/R) using Carriage bolt
(45), Arc washer (44) and Acorn nut
(58).
Step 5:
Connect the Pulse sensor wire (50) and
Extension wire (18) with the wires
coming from the Computer (9), and
then fix the Computer (9) onto the
computer bracket of the Handlebar post
(2) with Cross screw (55) and Flat
washer (54).
- 14 -