Description Of The Unit And Assembly; Technical Specifications; Important Warnings - joke EUR Mode D'emploi Et Entretien

2. DESCRIPTION OF THE UNIT AND ASSEMBLY

A - Motor block
B - Switch
C - Polyester filter
D - Hooks for tightening the motor block to the tank
E - Tank
F - Rolling wheels
G - Paperbag to fìt directly on the suction inlet. Its use does not
exclude the employ of the polyester filter that has to be used
anyway
H - Suction inlet.
O - Flexible hose.
Q - Wand.
ATTENTION: In order to keep in good efficiency the equipment
it is useful to clean the polyester filter after each utilization.

3. TECHNICAL SPECIFICATIONS

- Double filtering system by paperbag and polyester filter
- Max power 900 Watt
- Power regulator
- Voltage 230 Volt 50 Hz, single phase
- Dimensions (diameter x height): Ø 36 cm x 58 cm
- Weight approx. 8 kg
- Max noise level approx 71 dB(A) (with fonometer at 1 mt distance)

4. IMPORTANT WARNINGS

4.1 Components used in packaging (i.e. plastic bags) can be dangerous: keep away from children and animals.
4.2 The unit is for dry use oniy and must be stored in a dry place.
4.3 The use of this machine for anything not specified in this manual may be dangerous and must be avoided.
4.4 The suction nozzle should be kept away from the body, especially from delicate areas such as eyes, ears and mouth.
4.5 The equipment should be correctly assembled before use.
4.6 Do not collect health endangering dusts nor infiammable/esplosive substances.
4.7 Do not collect any kind of liquid substances.
4.8 Never leave the equipment unattended whilst in use.