Axis Communications T8134 Guide D'installation page 12

AXIS T8134 Midspan 60W
2. Connect the midspan (DATA & POWER OUT) to the camera,
using the network cable (Category 5/5e/6) that has been
connected to the camera.
3. Connect the midspan to a grounded (earthed) mains power
outlet (100–240 V AC) using the supplied power cable.
4. Make sure that the LEDs on the midspan indicate the correct
conditions. See Indicators on page 10
1 2 3
1
Port LED indicator
2
DATA & POWER OUT
3
DATA IN
12