Inserting An Sd Card - JVC Everio GZ-E110AG Guide De L'utilisateur

Inserting an SD Card

Insert a commercially available SD card before recording.
Close the LCD monitor.
(Base)
Turn off the power of this unit before
inserting or removing an SD card.
When the LCD monitor is closed, the unit turns off.
To remove the SD card
o
Push the SD card inward once, then pull it out straight.
NOTE
Operations are confirmed on the following SD cards.
Manufacturer
Video A
Using SD cards (including SDHC/SDXC cards) other than those specified above
0
may result in recording failure or data loss.
To protect the data, do not touch the terminals of the SD card.
0
When using an SDXC card, check its compatibility with the OS of your computer
0
by referring to the Detailed User Guide.
This unit is not guaranteed to operate with all SD cards, even when using the ones
0
specified above. Some SD cards may not work due to specification changes, etc.
6
EN
(Base)
Panasonic, TOSHIBA, SanDisk
Class 4 or higher compatible SDHC card (4 GB to 32 GB)/
Class 4 or higher compatible SDXC card (64 GB to 128 GB)
(When recording with video quality [UXP], Class 6 or higher is
recommended.)
Open the cover.
Insert an SD card.
Label