Chauvet Professional COLORADO 1 TRI-7 TOUR Guide De Référence Rapide page 3

EN
What Is
Included
AC Power
Power Linking
AC Plug
DMX Linking
DMX Connection
Master/Slave
Connection
·
COLORado™ 1-Tri-7 Tour
·
Power Input Cord
·
Accessory Holder
·
Gel Frame
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 20 COLORado™ 1 Tri-7 Tour products at 120 VAC or
38 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
The COLORado™ 1 Tri-7 Tour will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
Note: For optimum control of the 16-bit dimming channels in the TR16
personality, be sure that both dimming curves in SET > DIMX and SET >
CURV are set to OFF.
The COLORado™ 1 Tri-7 Tour uses a regular DMX data connection for its
DMX personalities: TR16, TOUR, ARC.1, AR1.d, AR1.S, and HSV. See the
User Manual to connect and configure for DMX operation.
The COLORado™ 1 Tri-7 Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
COLORado™ 1 Tri-7 Tour QRG
·
·
·
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Safety Cable
Warranty Card
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue Silver
Green