Turning On The Power; Auto Standby - Yamaha Restio ISX-80 Mode D'emploi

Turning on the power

Plug the power cable into the wall outlet
A
and press .
• The unit turns on.
• Press A
again to turn off (standby mode).
• By setting the CLOCK switch on the side (
the clock display is on or off, the status is "Standby" or
"Eco standby," respectively (see the table on the right).

Auto standby

Auto standby can be turned on /off in the
following procedure.
1
While pressing SOURCE of the unit,
plug the power cable into an outlet.
2
Press and hold SOURCE.
• The front panel display shows "ON" or "OFF."
P.6), when
Status in standby/eco standby
Standby
Setting of the clock Yes
Enable/disable the alarm Yes
Control from the app Yes
Clock display Yes
Network connection Yes
Bluetooth connection
Yes
• Set the CLOCK switch to "ON" when you use the
"MusicCast CONTROLLER" app.
• When you turn on the unit for the first time after
purchase, the Wi-Fi indicator blinks and the unit
automatically starts to search iOS device (
• When the auto standby is on (default setting), the
unit will automatically go into the standby state
under the following conditions.
- When the unit produces no sound of audio
input and is not operated for about 20 minutes
at selecting Bluetooth or NET as the source.
- When the unit has passed for 8 hours in the
absence of operation regardless of the audio
input.
Preparations
Eco
standby
No
No
No
No
No
No
P.16).
13
En