Danby DPA080CB7WDB Instructions page 6

Function Buttons (continued)
NOTE: While the unit is running in sleep mode, it will cancel if or MODE buttons
, ,
are pressed.
Button: Press the timer button to activate the AUTO-OFF setting. Each time it is pressed,
10.
increases the time setting by 30 minute increments for the fi rst 10 hours, then by 1 hour increments
up to 24 hours. To cancel the AUTO-OFF setting, press the button until the setting displays 0.0.
Button: Press this recessed button to lock all current settings, and the remote control will not
11.
accept any changes except for unlocking. Use the LOCK mode when you want to prevent settings
from changing accidentally. Press the LOCK button again to cancel the LOCK function. A LOCK sym-
bol will appear on the remote control display when the LOCK function is activated.
12. LED Display Button: Press this button to clear the unit's display, press it again to light the dis-
play.
5