Installing The Soundbar Above A Tv Stand; Component - Samsung HW-Q900A Mode D'emploi

Masquer les pouces Voir aussi pour HW-Q900A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7. Install the Soundbar with the attached Bracket-Wall Mounts by
hanging the Bracket-Wall Mounts on the Holder-Screws on the
wall.
8. Slide the Soundbar down as shown below so that the Bracket-Wall
Mounts rest securely on the Holder-Screws.
• Insert the Holder-Screws into the wide (bottom) part of the
Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts
down so that the Bracket-Wall Mounts rest securely on the
Holder-Screws.
11 INSTALLING THE
SOUNDBAR ABOVE A TV
STAND

Component

To install, attach the Rubber-Feet to the bottom of the Soundbar
before placing it in position above the TV stand. Make sure you attach
the Rubber-Feet so they do not lie outside the edges of the TV stand.
Refer to the figure below.
Place the Soundbar on a TV stand.
Microphone
ENG - 29
x 4
Rubber-Foot
Rubber-Foot

Publicité

Chapitres

Table des Matières
loading

Table des Matières