Publicité
Les langues disponibles
Les langues disponibles
After each measurement, you can enter the memory recall mode and query earlier temperature readings.
Do not hold the thermometer for a long time, because it is sensitive to the ambient temperature.
After each measurement, clean the temperature probe with a soft cloth, and put the thermometer in a dry
and well-ventilated place.
You should wait at least 10 seconds between each measurement.
It is dangerous to make a self-diagnosis or self-treatment based on the obtained measurement results. For
such purposes, please consult a doctor.
HOW TO READ YOUR TEMPERATURE
T indicates a temperature reading.
In forehead mode:
If 89.6ºF ≤ T ≤ 99.5ºF (32ºC ≤ T ≤ 37.5ºC), the green light will be displayed, with one long beep.
If 99.7ºF ≤ T ≤ 100.4ºF (37.6ºC ≤ T ≤ 38.0ºC), the orange light will be displayed with 6 short beeps, which is
a warning that you may have a low fever.
If 100.6°F ≤ T ≤ 109.2°F (38.1ºC ≤ T ≤ 42.9ºC), the red light will be displayed with 6 short beeps, which is a
warning that you may have a high fever.
In object mode:
If 32.0ºF ≤ T ≤ 199.0ºF (0ºC ≤ T ≤ 100ºC), the white light will be displayed with one long beep.
HOW TO MUTE AND UNMUTE THE THERMOMETER
When the thermometer is turned on, keep pressing the Thermometer (measure/mute) button for 5 sec-
onds, to switch from un-mute to mute.
CHECKING THE 40 SETS OF MEMORY DATA
When the thermometer is turned on or off, keep pressing the M (mode/memory) button for 5 seconds to go
to the memory mode, press this button again to check the 40 sets of memories one by one. If no value, it will
display "---".
ºC / ºF CONVERSION
Open the battery cover, use the toggle switch to change the ºC/ ºF.
AUTOMATIC OFF
The unit will shut down automatically after 13 seconds of no use.
BATTERY REPLACEMENT CAUTION
All memory records will be lost when you uninstall or reinstall the batteries.
HOW TO REPACE THE BATTERIES
Put two AAA batteries correctly into the compartment.
Remove the batteries if the thermometer will not be used for more than two months.
TEMPERATURE TAKING TIPS
1.
It is important to know each individual' s normal temperature when they are well. This is the only way
to accurately diagnose a fever. Record readings twice a day (early morning and late afternoon). Take
the average of the two temperatures to calculate normal oral equivalent temperature. Always take the
temperature in the same location, since the temperature readings may vary from different locations on
the forehead.
2.
A child's normal temperature can be as high as 99.9ºF ( 37.7ºC ) or as low as 97.0ºF ( 36.1ºC ).
Please note that this unit reads 0.9ºF (0.5ºC) lower than a rectal digital thermometer.
3.
External factors may influence ear temperatures, including when an individual has:
•
been lying on one ear or the other
•
had their ears covered
•
been exposed to very hot or very cold temperatures
•
been recently swimming or bathing
In these cases, remove the individual from the situation and wait 20 minutes prior to taking
a temperature.
4
Publicité
