Télécharger Imprimer la page

Jays s-Go Three Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

MAIN TECHNICAL SPECIFICATIONS
GENERAL
Power input 5V DC via micro USB cable (included). Use compatible USB power source.
Product dimensions. 130mm(Ø), 60mm(H), Weight 560g.
Main chipset, Actions RL6988.
Microphone embedded for enabling handsfree voice calls.
PRODUCT DESCRIPTION
Portable lifestyle Bluetooth speaker with built-in battery and microphone.
2-way powerful mono speaker system.
TECHNICAL
Amplifier 13W(max) with DSP function. 2-way speaker solution.
Bluetooth v4.2. Profile A2DP1.3/HFP1.7/HSP1.1/AVRCP1.6 (SBC codec).
Battery Li-ion 2000mAh (7,2V), up to 10 hours playback at around 40% volume.
Battery charge time from zero to full approximately 3 hours.
8 - ENGLISH
POWER SAVING
JAYS s-Go Three will go to standby mode automatically, after 20 mins of no usage
or after 5 mins if no device has been connected. This is according to regional
regulations and to save battery power.
WARRANTY
Your JAYS s-Go Three is of cause covered by warranty according to regional laws,
depending on country of purchase. Please always consult your local dealer for
warranty issues.
SAFETY
Only use compatible USB power source to charge the device.
Do not use s-Go Three in wet or dusty environments as it might damage your
device and void warranty.
JAYS s-Go Three should not be used in direct sunlight. Damages caused by
sunlight or severe heat will risk voiding your warranty.
JAYS s-Go Three has built-in Li-ion battery. Please carefully check rules in your
country for safe and correct handling and disposal.
The battery must not be exposed to excessive heat such as direct sunlight, fire
or the like.
Never try to open or repair JAYS s-Go Three. It will void warranty.
IMPORTANT INFORMATION
ENGLISH - 9

Publicité

loading