Jays s-Go Three Mode D'emploi page 4

CONTROLLING YOUR
NEW JAYS S-GO THREE
Volume buttons
Power button
Micro USB
for charging only
6 - ENGLISH
LED Indication
(Will be RED
during charging)
Microphone
POWER
Press and hold power button for 2 seconds to power ON
ON/OFF
your s-Go Three speaker. You will hear a welcome tone once
powered ON. The speaker will automatically try to connect to
the last device used (if any). Press again for 2 seconds and the
speaker will power OFF.
PAIRING /
If you want to pair a new device with your s-Go Three then the
CONNECTION
speaker must be put into pairing mode first.
When the speaker is powered ON it will automatically be in both
Pairing, and Connection mode for 5 mins. In this period, you are
able to pair new devices or re-connect already paired devices.
If the speaker is already powered ON you can double press the
power button for enabling Pairing Mode again.
When the speaker enter pairing mode you will also hear the
message "Waiting for connection" and the speaker will now be
visible on your Bluetooth device list. When successfully paired/
connected, the speaker will reply "Time to play".
VOICE CALLS
JAYS s-Go Three has built-in mic. for handsfree operation during
calls. Calls can be accepted from your device, or s-Go Three by
pressing Power button once.
HOW TO USE YOUR
NEW JAYS S-GO THREE
ENGLISH - 7