Axis P3353 Guide D'installation page 7

AXIS P33 Network Camera Installation Guide
Mount the camera
This Axis product can be mounted with the cables routed through or along the wall. This product
can also be fitted with a metal conduit for protecting the cabling when they are routed along the
wall. See the illustration that follows.
Mount camera directly onto the wall
1. Using the drill template drill 2 holes in the wall.
2. Route and connect the network cable.
3. Attach the camera unit to the wall using screws and plugs appropriate for the wall material.
Mount camera using a mounting bracket (not included)
1. Using the drill template drill 2 holes in the wall.
2. Route the network cable through the wall and through the holes in the mounting bracket.
3. Attach the mounting bracket to the wall, using screws and plugs appropriate for the wall
material.
4. Connect the network cable.
5. Optionally connect the I/O and audio cables; see page 17 for details.
6. Optionally insert the SD memory card.
7. Attach the camera unit to the mounting bracket using two appropriate screws.
Note:
• These instructions are for mounting the camera on a wall. The mounting bracket can also be used for
mounting the network camera to a junction box.
• AXIS P3353 and AXIS P3354 do not support audio and I/O.
Metal conduit (Optional/not included)
Mounting bracket (Optional/not included)
Network cable
Wall screws
Page 7
Network cable
M4x8 screw