Axis P3353 Guide D'installation page 14

Page 14
Complete the installation
1. If the cables are routed along the wall, remove the side lid from the camera's dome cover.
2. Rotate the black protective shield inside the dome casing to match the camera's position.
3. Clean the dome with a dry soft cloth to remove dust and finger prints and use a blower to
remove dust from the lens.
4. Mount the dome casing using the supplied tamper-proof screws and screw driver. Now that the
dome is in place, check that the camera is properly focused.
The installation is now complete.
Side lid
Dome cover
AXIS P33 Network Camera Installation Guide
Camera unit
Dome cover
Network cable