Martin Logan Motion XT XTW6 Mode D'emploi page 22

Specifications*
System Frequency Response . . . . . . . .
Aiming. . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity. . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency. . . . . . . . . . . . . .
High-Frequency Driver . . . . . . . . . . . .
Low-Frequency Driver . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . .
Suitable Amplifier Range . . . . . . . . . .
Maximum Power Handling . . . . . . . . .
Weight. . . . . . . . . . . . . . . . . . . . . . . .
Overall Size (h x w x d) . . . . . . . . . . .
Required opening . . . . . . . . . . . . . . . . .
Projection from wall surface . . . . . . . .
Depth required behind wall surface. . .
*Specifications are subject to change
without notice.
7.69" (19.50cm)
22
XTW6-LCR
44 - 25,000 Hz ±3dB
N/A
93dB @2.83V/ 1 meter
Compatible with 8 ohms
260, 2,470 Hz
FMT Transducer
1.27" x 2.4" (3.22cm x 6.09cm) Opening
4.5" x 2.75" (11.43cm x 6.98cm) Diaphragm
6.5" (16.51cm) black Kevlar with Nomex backer cone
Push style accommodates wire up to 12AWG
50-300 Watts
150 Watts
3.5 lbs. each (1.6 kg)
28" x 7.69" x 3.67" (71.12 x 19.5 x 9.31cm)
6.64" x 27" (16.9 x 68.5cm)
0.13" (0.32cm)
3.54" (8.99cm)
3.67" (9.31cm)
6.58" (16.7cm)
3.54" (8.99cm)
CUTOUT DIMENSIONS
(WITH TOLERANCE)
0.13" (0.32cm)
WIDTH: 6.64in [169mm]
HEIGHT: 27.00in [685mm]
7.76" (19.70cm)
0.32"
3.85" (9.79cm)
3.54" (8.99cm)
(2.5cm)
1"
MAX CEILING THICKNESS
(0.80cm)