Martin Logan Motion XT XTW6 Mode D'emploi page 21

System Frequency Response . . . . . . . .
Aiming. . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity. . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency. . . . . . . . . . . . . .
High-Frequency Driver . . . . . . . . . . . .
Low-Frequency Driver . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . .
Suitable Amplifier Range . . . . . . . . . .
Maximum Power Handling . . . . . . . . .
Weight. . . . . . . . . . . . . . . . . . . . . . . .
Overall Size (h x w x d) . . . . . . . . . . .
Required opening . . . . . . . . . . . . . . . . .
Projection from wall surface . . . . . . . .
Depth required behind wall surface. . .
*Specifications are subject to change
without notice.
15.79"
15.87"
(40.10cm)
(40.30cm)
XTW5-LCR
61 - 25,000 Hz ±3dB
N/A
92dB @2.83V/ 1 meter
Compatible with 8 ohms
2,180 Hz
FMT Transducer
1.27" x 2.4" (3.22cm x 6.09cm) Opening
4.5" x 2.75" (11.43cm x 6.98cm) Diaphragm
5.25" (13.33cm) black Kevlar with Nomex backer cone
Push style accommodates wire up to 12AWG
50-250 Watts
125 Watts
4.4 lbs. each (2 kg)
7.87" x 15.79" x 3.32" (20 x 40.1 x 8.43cm)
14.5" x 6.5" (36.8 x 16.5cm)
0.12" (0.3cm)
3.20" (8.13cm)
(8.43cm)
3.32"
(8.13cm)
3.20"
(0.30cm)
0.12"
(8.98cm)
3.54"
1" (2.5cm)
MAX WALL/CEILING
THICKNESS
14.38" (36.15cm)
CUTOUT DIMENSIONS
(WITH TOLERANCE)
WIDTH: 14.5in [368mm]
HEIGHT: 6.5in [165mm]
MOUNTING LOCKS
EXTEND 0.375in [9.5mm]
BEYOND LONG EDGE
(VERTICAL AND HORIZONTAL)
21