Siren R3 Manuel De L'utilisateur page 7

2020 SIREN R3 USER MANUAL 25.02.20.indd 7
for the drag weight and retighten to lock it into position.
4.
To add several drag weights slide the collars further along
the Glow Pipe to create the additional space required. To fit two
Drag Weights slide the collar 14mm, for three drag weights
21mm.
5. Slide the drag weight on and screw into the threaded collar.
6. Replace the moulded diffuser at the end of the Glow Pipe.
Your Nash Bobbin Head can now be slid on and screwed to the
Drag Weight.
P7 SIREN R3 USER MANUAL
13/07/2020 08:41