Set Up; X84; Setting The Clock - LaMotte DC1500 Mode D'emploi

8. Press
9. Press
ENTER
reverse font (light background with dark
characters) will appear to indicate that the
reading can be adjusted.
10. Press
shown to the concentration of the prepared
standard, 1.00 in this example.
NOTE: A maximum adjustment of 25% is
possible.
11. Press
ENTER
Calibration procedure without saving the
adjustment, press
and at any time to return to the
ENTER
default value. The calibration has now been
standardized and can be used for testing.
Scroll to Scan Blank and begin testing.

SET UP

„ SETTING THE CLOCK

Setting the clock allows the correct time and date stamp to be stored with each reading in the
data logger.
1. From the Editing Menu, press
to scroll to Set Clock.
to scroll to Calibrate.
to select Calibrate. A
or to adjust the value
to save the value. To leave the
.Press
EXIT
0.99
%T/Abs
Calibrate
12:00:00
025 Chlorine T DPD
0.99
∧, ∨=Edit, ENTER=Save
∧ +ENTER=Default
12:00:00
025 Chlorine T DPD
1.00
∧, ∨=Edit, ENTER=Save
∧ +ENTER=Default
12:00:00
1.00
%T/Abs
Calibrate
12:00:00
or
Set Clock
Logging
Factory Setup
Set Power Save
12:00:00
9
025 Chlorine T DPD
ppm
001/500
ppm
001/500
ppm
001/500
025 Chlorine T DPD
ppm
001/500
Editing Menu
001/500