Textron GREENLEE 555 Serie Manuel D'instructions page 9

Setup (cont'd)
For 1-1/2" to 2" EMT and IMC
5. Slide the roller engagement arm (4) over the main
roller spindle and secure with the roller retainer (5).
6. Mark the conduit according to bend layout
instructions.
7. Place the bender in the desired vertical or horizontal
position.
Zeroing 555DX
1. Use BEND or UNLOAD on the pendant to align the
shoe groove with zero on the bender decal.
2. Press and hold the
Greenlee / A Textron Company
button while pressing JOG.
555 Series Electric Benders
®
To place bender in horizontal position
1. Ensure handle (1) is on bender and pinned in place.
2. Stand in back of the bender, grasp the handle, place
one foot on the kick bar (14), and pull back on the
handle.
3. Gently lower the bender into position.
9
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070