Télécharger Imprimer la page

Kuppersbusch FWKU1870.0X Mode D'emploi page 16

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
 staff kitchen areas in shops, offices and other
working environments;
 farm houses and by clients in hotels, motels and other
residential type environments;
 bed and breakfast type environments;
 catering and similar non- retail applications;
WARNING — Do not store explosive substances such as
aerosol cans with a flammable propellant in this
appliance.
WARNING — Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
WARNING — Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do notuseelectrical appliances inside
the food storage compartments of the appliance, unless
they
are
of
the
type
themanufacturer.
WARNING — The refrigerant and insulation blowing
gas are flammable. When disposing of the
appliance, do so only at an authorized waste
disposal centre. Do not expose to flame.
Refrigerant
The refrigerant isobutene (R600a) is contained within the
refrigerant circuit of the appliance, a natural gas
with a high level of environmental compatibility,
which is nevertheless flammable. During transportation
and installation of the appliance, ensure that none of the
components of the refrigerant circuit becomes
damaged. The refrigerant (R600a) is flammable.
Caution risk of fire
If the refrigerant circuit should be damaged:
 Avoid opening flames and sources of ignition.
 Thoroughly ventilate the room in which the appliance is
situated. It is dangerous to alter the specifications or
modify this product in any way. Any damage to the
cord may cause a short circuit, fire, and/or electric
shock.
Electrical safety
The power cord must not be lengthened. Make sure that
the power plug is not crushed or damaged. A crushed or
damaged power plug may overheat and cause a fire.
Make sure that you can access the main plug of the
appliance. Do not pull the main cable. If the power plug
socket is loose, do not insert the power plug. There is a
risk of electric shock or fire. You must not operate the
appliance without the interior lighting lamp cover. The
fridge is only applied with power supply of single phase
alternating current of 220~240V/50Hz. If fluctuation of
voltage in the district of user is so large that the voltage
exceeds the above scope, for safety sake, be sure to
apply A.C. Automatic voltage regulator of more than
350W to the fridge. The fridge must employ a special
power socket instead of common one with other electric
appliances. Its plug must match the socket with ground
wire.
recommended
by

Publicité

loading