Symmons Identity 6703 Manuel D'utilisation Et D'entretien

6703, 6704
Operation & Maintenance Manual
Model Numbers

6703
Identity Hand Shower System

6704
Identity Tub/Hand Shower System
Modifications
CG
 -1.5
1.5 gpm (5.7 L/min) flow restrictor
 -2.0 2.0 gpm (7.6 L/min) flow restrictor
6' metal hose in place of 5' standard
 -72
metal hose
30" slide bar in place of wall cradle
 -B30
48" slide bar in place of wall cradle
-B48

 -CHKS Integral check stops - for use in
installations where a positive shut-off
device is used downstream of mixing valve
 -IPS 1/2" female IPS connections
Less hand shower
-L/HS

 -LP Loop handle
 -LR Lever handle
 -OP 13" oval plate
Quick disconnect on hand shower units
-QD

White vinyl hose in place of metal hose
 -R
Rebuild trim kit
 -REB-TRM
 -REV Reverse coring, hot on right, cold on
left, for back to back installations
-SS
 Slip spout on any tub/hand shower unit
 -STN
Satin Nickel finish
 -T724 24" slide / grab bar with ADA hand
shower in place of standard hand show-
er unit
 -T736 36" slide / grab bar with ADA hand
shower in place of standard hand show-
er unit
 -TRM Trim only, valve not included
 -X Integral service stops - allows water
shutoff at valve for service
Note: Append appropriate -suf x to model number.
Identity
Specification
6703
Hand shower system powered by the Temptrol
balancing valve. Features adjustable stop screw to limit
handle turn, wall ell, in-line vacuum breaker, 60" exible
metal hose, hand shower cradle, 1 mode hand shower and
standard 2.5 gpm (9.5 L/min) ow restrictor. Components
made from metal and nonmetallic materials, plated in
standard polished chrome nish.
6704
Tub/hand shower system powered by the Temptrol
pressure-balancing valve. Features adjustable stop screw
to limit handle turn, diverter tub spout, wall ell, in-line
vacuum breaker, 60" exible metal hose, hand shower
cradle, 1 mode hand shower and standard 2.5 gpm
(9.5 L/min) ow restrictor. Components made from metal
and nonmetallic materials, plated in standard polished
chrome nish.
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
For California Residents
WARNING: This product contains chemicals known to the
State of California to cause cancer, birth defects, or other
reproductive harm.
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
™
2.0 gpm (7.6 L/min)
® pressure-
®
Certi ed by
CSA Group