Publicité
Liens rapides
S6710PD
Single Handle Pull-Down Kitchen Faucet
Specification Submittal
Model Numbers
☐
S6710PD
Single Handle Pull-Down Kitchen
Faucet
Finish Options/Modifications
☐
DP
8" deck plate
☐
STS
Stainless Steel finish
Note: Append appropriate suffix to model number.
Compliance
ASME A112.18.1/CSA B125.1
NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372
Architectural/ Engineering Specification
Symmons Identity ____________ with Single hole mount configuration, 3 hole mount configuration with
optional 8" deck plate, Two mode wand (spray to stream touch control & standard), 360 degree spout rotation,
Quarter turn ceramic cartridge, 25 inch braided hose water supply connections, Standard 1.5 gpm (5.7 L/
min) flow rate, components shall be metal and nonmetallic construction, plated in standard polished chrome
finish, 10 Year Commercial Warranty. ASME A112.18.1/CSA B125.1, NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372,
complaint.
Location:
Identity
TM
Feature Highlights
•
Single hole mount configuration
•
3 hole mount configuration with optional 8" deck
plate
•
Two mode wand (spray to stream touch control &
standard)
•
360 degree spout rotation
•
Quarter turn ceramic cartridge
•
25 inch braided hose water supply connections
•
Standard 1.5 gpm (5.7 L/min) flow rate
•
Components shall be metal and nonmetallic
construction, plated in standard polished chrome
finish
Warranty
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Publicité
Manuels Connexes pour Symmons Identity S6710PD
Sommaire des Matières pour Symmons Identity S6710PD
- Page 1 Architectural/ Engineering Specification Symmons Identity ____________ with Single hole mount configuration, 3 hole mount configuration with optional 8" deck plate, Two mode wand (spray to stream touch control & standard), 360 degree spout rotation, Quarter turn ceramic cartridge, 25 inch braided hose water supply connections, Standard 1.5 gpm (5.7 L/ min) flow rate, components shall be metal and nonmetallic construction, plated in standard polished chrome finish, 10 Year Commercial Warranty.
- Page 2 Min. Ø 7-16", 11 mm ■ ■ ■ ■ Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621 ■ ■ ■ ■ Copyright © 2018 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-1747 REV F 110818...
- Page 3 Nota: Anexar el sufijo apropiado al número de modelo. Cumplimiento ASME A112.18.1/CSA B125.1 NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372 Garantie Garantie limitée - à l’acheteur original dans les installations du consommateur/résidentiel. 10 Ans - pour les installations commerciales/industriel. Se reporter au www.symmons.com/warranty pour l’information complète concernant la garantie.
- Page 4 Mín. Ø 7-16", 11 mm ■ ■ ■ ■ Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621 ■ ■ ■ ■ Copyright © 2018 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-1747 REV F 110818...
- Page 5 ASME A112.18.1/CSA B125.1 NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372 Garantie Garantie limitée - à l’acheteur original dans les installations du consommateur/résidentiel. 10 Ans - pour les installations commerciales/industriel. Se reporter au www.symmons.com/warranty pour l’information complète concernant la garantie.
- Page 6 Min. Ø 7-16 po, 11 mm ■ ■ ■ ■ Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621 ■ ■ ■ ■ Copyright © 2018 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-1747 REV F 110818...