Intended Use Of Sheet Sander; Safety Instructions - Dexter 330SHS3.5 Manuel D'instructions

FR

1. INTENDED USE OF SHEET SANDER

ES
This machine is intended to be used for dry sanding with suitable grained abrasive papers.
PT
It is suitable for surface grinding on wood, metal, body filler and filler surfaces, removal of
layers of old paint, intermediate grinding and rust removal. Do not use machines, tools and
IT
accessories for additional applications (see manufacturer's instructions) for works other
than those for which they are designed for. All other applications are expressly ruled out.
EL

2. SAFETY INSTRUCTIONS

PL
UA
GENERAL POWER TOOL SAFETY WARNINGS
RO
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
EN
instructions listed below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
a)
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
134