Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Heat Mode
Model 292852 Only
Only the heat pump model has this function.
To set this mode correctly:
• Press the
button until the Heat symbol illuminates.
• Select the target temperature 55°F-81°F (13°C-27°C) by pressing the
value is displayed.
• Select the required fan speed by pressing the
• The unit features a self-evaporating system, and under normal operating conditions, should not require having the
tank emptied.
• Under prolonged/high humidity conditions, you may be required to empty the tank.
• When the tank is full, the appliance shuts down and
removed and emptied. Let all of the water in basin drain out. When all of the water has been drained, the air conditioner
will start again.
Note: When operating in very cold rooms, the appliance will defrost automatically, interrupting normal operation.
appears on the display. During this operation, it is normal for the air conditioner to make noise as it's defrosting.
In this mode, you may have to wait a minutes before the appliance starts releasing hot air. In this mode, the fan may
operate for short periods even though the set temperature has been reached.
Fan Mode
When using the appliance in this mode, the air hose does not need to be attached.
• Press the
button until the Fan symbol illuminates.
• Select the required fan speed by pressing the
The screen will display
Dry Mode (dehumidifier only mode)
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc). In dry mode, the appliance should
be installed in the same way as the cool mode, with the air exhaust hose attached to enable moist/humid air to be vented
outside. To set this mode correctly:
• Press the
button until the Dry symbol illuminates. The screen will display
• In this mode, fan speed is selected automatically by the appliance and cannot be set manually.
During the DRY mode, you will need a garden hose (sold separately) or drainage hose to drain the condensate from the unit.
(Dry Mode continues on next page).
Portable Air Conditioner
button. four speed settings are available: High/Medium/Low/Auto.
button. Three speed settings are available: High/Medium/Low.
for high speed,
for medium speed,
or
button until the corresponding
(full tank) appears on the display. The tank cap must be
for low speed.
.
6
User's Manual
Fig. 14
Fig. 15
Fig. 16
Publicité
Chapitres
Table des Matières
Dépannage
