Display Screen - Global Industrial 293065 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LOCATION
• The unit should be placed on a firm foundation to minimize noise and vibration.
For safe and secure positioning, place the unit on a smooth, level floor strong
enough to support the unit.
• The unit has casters to aid placement, but it should only be rolled on smooth, flat
surfaces. Use caution when rolling on carpeted surfaces. Use caution and protect
floors when rolling over wood floors. Do not attempt to roll the unit over objects.
• The unit must be placed within reach of a properly rated grounded socket.
• Never place any obstacles around the air inlet or outlet of the unit.
• Allow at least 17.5" (45cm) of space away from the wall for efficient
air conditioning.
• The hose can be extended, but it is the best to keep the length to a minimum of 15.7"
(40cm). Also make sure that the hose does not have any sharp bends or sags.
THE DISPLAY SCREEN
Cool
Mode
*Heat
Mode
Only for model
292852
*Only Heat Pump
model has this function
Turning the appliance on
Plug the air conditioner
into an electrical outlet.
Press the
button to turn on the appliance. The last function active when it was turned off will appear.
Never turn the appliance off by unplugging the power cord. Always press the
minutes before unplugging. This allows the appliance to perform a cycle of checks to verify operation.
Cool Mode
Ideal for hot, muggy weather when you need to cool and dehumidify the room. To set this mode correctly:
• Press the
button several times until the Cool symbol appears.
• Select the desired temperature 64°F-90°F (18°C-32°C) by pressing the
value is displayed.
• Select the required fan speed by pressing the
The most suitable temperature for the room during the summer varies from 70°F to 76°F (21°C to 24°C). The fan speed
difference is more noticeable when the appliance is under Fan mode but may not be noticeable under Cool mode.
Portable Air Conditioner
Fan
Timer
Mode
Dry
Mode
Mode
Timer
Increase
Selection
Temperature
button. four speed settings are available: High/Medium/Low/Auto.
Fan Speed
Decrease
Fan
Temperature
Speed
or
button until the corresponding
5
User's Manual
Fig. 9
Fig. 10
WiFi symbol
Fig. 11
Power
On/Off
Fig. 12
button, then wait a few
Fig. 13

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

292850292851293066292852

Table des Matières