Function; Before Use; Charging - LIVARNO LUX 298692 Instructions De Montage, D'utilisation Et Consignes De Sécurité

WEAR PROTECTIVE GLOVES! Leaked or dam-
aged batteries / rechargeable batteries can cause
burns on contact with the skin. Wear suitable pro-
tective gloves at all times if such an event occurs.
In the event of a leakage of batteries / rechargeable batteries,
immediately remove them from the product to prevent damage.
Remove batteries / rechargeable batteries if the product will
not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity
marks (+) and (-) on the battery / rechargeable battery and
the product.
Clean the contacts on the battery / rechargeable battery and
in the battery compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the
product immediately.
The illuminants are not replaceable.
If the illuminants fail at the end of their lives, the entire product
must be replaced.

Function

The solar cell
6
charges the rechargeable battery installed in the battery compart-
ment . This rechargeable battery stores electric energy supplied by
9
the solar cell. A fully charged rechargeable battery supplies enough
energy for about 0.5 hours of light in sensor mode or about 8 hours
of light in stand-by mode. During the summer, a fully discharged
rechargeable battery will need approx. two to four days of consist-
ent exposure to sunlight until it is fully charged. The rechargeable
battery must be charged before using the light for the first time
(see "Charging").

Before use

Note: Remove all packaging materials from the product.

Charging

Note: The rechargeable battery built into the product is charged
at the time of delivery. However, it may have lost charge during
converts energy from sunlight into electricity. It
GB/IE/NI 9