How To Forcibly Eject A Disc; How To Read This Manual - JVC KV-MRD900 Manuel D'instructions

How to reset your monitor
This will reset the microcomputer. Your preset
adjustments will also be erased.

How to forcibly eject a disc

If a disc cannot be recognized by the monitor
or cannot be ejected...
Monitor
(for about 5 seconds
while power is on)
• If this does not work, reset your monitor.
• Be careful not to drop the disc when it
ejects.
4
The disc comes
out.

How to read this manual

The following methods are used to make the
explanations simple and easy-to-understand:
• Some related tips and notes are explained in
"More about this monitor" (see pages
33 – 35).
• Button operations are mainly explained with
the illustrations as follows:
Press briefly.
Press repeatedly.
Press either one.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.