JVC KV-MRD900 Manuel D'instructions page 30

AUDIO menu
Item
DIGITAL AUDIO OUTPUT
DOWN MIX
D. (Dynamic) RANGE
COMPRESSION
30
Select the signal format to be emitted through the DIGITAL OUT
(Optical) terminal. For details, see page 36.
• PCM ONLY : Select this when connecting an amplifier or a
decoder incompatible with Dolby Digital, DTS, MPEG Audio, or
connecting to a recording device.
• DOLBY DIGITAL/PCM : Select this when connecting an
amplifier or a decoder compatible with Dolby Digital.
• STREAM/PCM : Select this when connecting an amplifier or a
decoder compatible with Dolby Digital, DTS, or MPEG Audio.
When playing back a multi-channel DVD disc, this setting affects
the signals reproduced through the analog terminals—AV-OUT and
cordless headphones (and through the DIGITAL OUT terminal when
"PCM ONLY" is selected for "DIGITAL AUDIO OUTPUT").
• DOLBY SURROUND : Select this when you want to enjoy multi-
channel surround audio by connecting an amplifier compatible with
Dolby Surround to this monitor.
• STEREO : Normally select this.
You can enjoy a powerful sound at low or middle volume levels while
playing a Dolby Digital software.
• AUTO : Select this to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel software).
• ON : Select this to always use this function.
Contents