Domus DTA-45 Mode D'emploi page 64

Once placed in its final working place, extract the two wooden skids which is secured to the dryer by
the bottom of the base 4 M10x70 screws are situated 12cm from the ends. See procedure in the
following images. After removing the skates, lower the machine and level using the leveling feet
(see next "Leveling" section). Save skates with original packing for possible future movements. Do
not push the machine or an overcome obstacle without skates, the machine is in danger of
deformation and malfunction.
The drum does not have anchorages for transport.
1. LIFT WITH PALLET TRUCK 2. LOOSEN WITH SPANNER Nº 17 3. REMOVE M10X70 BOLTS
4. REMOVE WOODEN SKATES
5. PLACE LEVELING FEET
63