Setting The Child Lock; Checking The Filter Status; Cleaning And Maintenance - Philips AC4236 Mode D'emploi

Setting the child lock

1
Touch and hold
» displays on the screen�
» Only and
light up�
2
Touch and hold
» disappears from the screen�
» All buttons light up�

Checking the filter status

• Touch the filter status check/reset
» The percentage of remaining service life of the filter displays on the screen�
Icon color Filter life indication
Blue Optimal service life
Blue-purple Good service life
Purple-red Service life almost reaches the end
Red Service life ends, replace the filter
Note: The appliance goes back to normal display if no operations after 3 seconds�
5

Cleaning and maintenance

Note:
• Always unplug the appliance before you clean it�
• Never immerse the appliance in water or any other liquid�
• Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to
clean any part of the appliance�
• Never use any liquids (including water) to clean the filter�
• Do not attempt to clean the particle sensor and gas sensor with a vacuum cleaner�
EN
10
and button for 3 seconds to activate child lock (fig
button lights up, other buttons dim� After 3 seconds, all buttons
and button for 3 seconds again to deactivate child lock (fig
button to check the filter service life status (fig
)�
q
)�
r
s
Display (%)
16-100
9-15
4-8
0-3
)�