Cleaning; Troubleshooting - Krups THE SUB VB650851 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

For the other glasses, hold the tap handle in forward position until the glass is filled .
IMPORTANT: If you pull the handle too slowly you will generate extra foam.
Please do not hesitate to go to www.the-sub.com to get more information on how to
serve the perfect beer.
CLEANING AFTER DAILY USE
Depending on the model, the drip tray can be composed of two parts .
!
Note: the drip tray (I) can be washed in hot water with a mild detergent (17) . It can also
go in the dishwasher . The stainless steel drip tray (J) (according to models) cannot be
cleaned in the dishwasher .
!
Warning! Never use harsh detergents, such as vinegar, acids or solvents.
CLEANING DURING INSTALLATION OF A NEW TORP
Clean away all traces of beer that have built up on the tap .
The tap mechanism should be cleaned with a damp cloth and some mild detergent (18) .
!
Warning! Do not attempt to clean the mechanism with hard and/or sharp objects.
Clean the cooling chamber of THE SUB using a soft dry cloth (19).
Problem
THE SUB does
not turn on .
You can not
close the tap
cover .
You can not
close the door of
THE SUB .

3 - CLEANING

4 - TROUBLESHOOTING

Possible causes
THE SUB is not plugged in .
The electronic board may be
defective .
The tube spout is not inserted
correctly .
THE TORP is not inserted
completely .
Solutions
Plug THE SUB into the nearest
electric socket .
Contact the KRUPS customer
service .
Remove the tube spout from
THE SUB and fit it again
following the diagrams 10 - 11 .
Insert THE TORP in THE SUB
completely .
11

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

The sub vb650852

Table des Matières