Inakustik NF-A1 Mode D'emploi page 20

NF-A1
Operation
9. Servicing
Servicing of the devices should be performed exclusively by qualified
service personnel. Servicing is necessary in all cases of damage, i.e.
in the case of damaged cables and plugs, as well after liquid spills or
objects falling on the devices, devices falling down, foreign objects
entering the devices, exposure of devices to rain or humidity, or other
influences impairing the functioning of the devices.
In order to avoid endangerment through electrical current, the device
may only be opened by qualified personnel, unless permission is
expressly given in the operating manual.
Opening the housing is strictly prohibited, unless permission is
specified in the operating manual, since the components and
conductors may carry a fatally high voltage level.
10. Fuses
There are many types of device malfunctions: When necessary,
replace the device fuse only with a fuse of the type indicated on the
fuse holder. Never use a fuse of another type. In case of doubt, the
replacement must be carried out by a qualified technician! If the
replaced fuse blows immediately, the appliance should be handed in
to be serviced. No liability is accepted for damage caused by
unassisted interventions or incorrect fuse types. A replacement fuse is
located in the fuse holder (underneath the mains connection).
11. Maintenance
Always clean the products with a soft, dry and lint-free cloth, or with
a brush. Do not under any circumstances use scouring powder,
alcohol, benzine, furniture polish or similar substances.
Scope of delivery
1 x Interconnect cable with NF-A1 Driver
1 x NF-A1 Power Supply
1 x AC-1502 cower cord
1 x Operating manual
20