Hydrotech HDS Serie Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

READ ALL SAFETY WARNINGS BEFORE USING PRESSURE WASHER
HAZARD
RISK OF BODILY INJURY
Operator's Manual
IMPORTANT SAFETY INSTRUCTIONS
POTENTIAL CONSEQUENCE
Injury may occur from the pressure
washer.
!SAVE THESE INSTRUCTIONS!
PREVENTION
Always hold on firmly to the gun/lance as-
sembly when starting and operating the unit.
Failure to do so can cause the lance to fall
and whip dangerously.
Know how to stop the pressure washer and
bleed pressures quickly. Be thoroughly familiar
with controls.
Follow the maintence instructions specified
in the manual.
Do not leave pressurized unit unattended. Shut
off the pressure washer and release trapped
pressure before leaving.
Do not operate the unit if you see any fuel, oil or
water leaks from the machine. Do not resume
operation until the unit has been inspected and
repaired by a qualified service person.
Never run the unit with the governor discon-
nected or operate at excessive speeds.
Place unit in a clean, dry, flat area for servic-
ing. Before servicing the unit: turn the unit
off, relieve the water pressure from the trigger
gun, and allow the unit to cool down. Service
in clean, dry, flat area. If applicable, block
wheels to prevent unit from moving.
Do not move the unit by pulling on the hose.
9

Publicité

Table des Matières
loading

Produits Connexes pour Hydrotech HDS Serie

Table des Matières