THOMSON TCM Serie Mode D'emploi page 21

9. The Thomson cable modem installation is now complete. To validate a proper installation,
perform the following instructions:
• Click on the "Start" icon in the lower left-hand corner of your screen.
• Select "Settings," followed by "Control Panel." The "Control Panel" window will appear.
• Double-click on the "System" icon, and select the "Device Manager."
• Scroll down the list until you come to "Network Adapters." Double-click on "Network
Adapters."
• The "RCA or Thomson USB Cable Modem" should exist. If "RCA or Thomson USB Cable
Modem" does not exist, the cable modem was NOT installed correctly. Go to Solution 2 on
page 35.
Connecting the Cable Modem
19