THOMSON TCM Serie Mode D'emploi page 18

Connecting the Cable Modem
11. Windows should now prompt you to install either the "RCA or Thomson USB Cable Modem"
or "RCA or Thomson DCM 2xx Cable Modem." Click "Next" to install the driver.
At this point your PC needs to copy Windows 2000 specific files. If these files are not located
on your hard drive, you may need to insert your Windows 2000 installation media (i.e.,
Windows 2000 CD-ROM), but first remove the cable modem CD-ROM.
12. After the Windows specific files are copied, you may be asked for another USB driver file
named "NETRCACM.SYS," located on the cable modem CD-ROM. Remove the Windows
2000 CD-ROM (if necessary), and reinsert the cable modem
CD-ROM that accompanied your cable modem.
13. Click on "Finish" to complete the process (Fig. 15).
Fig. 15
16