Kohler K-3180 Guide D'installation page 6

Countertop Opening —
Bottom View
3. Install the Mounting Brackets
- For laminate type countertops, make sure that all exposed
non-laminated surfaces located near the cut-out area are finished
and sealed in order to prevent damage from water absorption.
- Equally space the required number of mounting brackets (see chart
on roughing-in page) and locate the mounting holes on the
underside of the countertop 1-3/8" (3.5cm) from the edge of the
countertop opening.
- The type of fastener needed is dependant upon the countertop
material and should be recommended by the countertop supplier.
- Loosely install the mounting brackets to the countertop.
- Turn the brackets parallel to the opening to allow for easy
installation of the sink.
C
1007258-2-
Insert (Not Furnished)
Mounting
Bracket
Fastener
(Not Furnished) 1-3/8" (3.5cm)
± 1/4" (6mm)
6
Edge
Countertop
Opening
Kohler Co.