AUTO-HAK Z02 Instructions De Montage page 5

Towing hitch accessories:
Towing hitch (without electrical set)
Cat. no. Z02
Class: A50-X
Designed for:
Manufacturer: MITSUBISHI
Model: PAJERO
Type: 3/5 doors, V20, (V2/V4)
produced since 12.1990 till 05.2000
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 0864
This towing hitch is designed according to rules of safety traffic regulations. The
towing hitch is a safety component and can be install only by qualified personnel.
Any alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer mass and max. vertical
cup mass are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www.autohak.com.pl
Technical data:
D-value: 14,3 kN
maximum trailer weight: 3300 kg
maximum vertical cup mass: 135 kg
Foreword
Max vehicle weight [kg]
9,81
X =
1000
Max vehicle weight [kg]
D [kN]